APN configuration methodologies
With eUICCs, users can switch between multiple connectivity profiles. Since the profiles can have different APNs, creating a robust APN change methodology is important. Here are some ideas on how that could be achieved:
Building an APN library locally on a device using ICCID & IMSI prefixes as a mechanism can make operational workload much lesser.
Should implement a mechanism on devices to check ICCID and IMSI and set the APN
Should be able to update APN library on devices when a new profile type is used - preferably across the fleet of devices
On-demand APN configuration
Building a mechanism to update the APN Over-The-Air via a non-data channel (e.g. SMS) can help keep complexity on devices to a minimum and manage APN configuration only when required.
Should be able to communicate via SMS with the devices
Should have a good understanding of which profile is active at a time (this can get little complex in cases of fallback/ switchback profiles)
Building hybrid methodologies customised to specific use cases can help keep the solution practical.
An example is to keep a list of APNs on the device that can be updated Over-The-Air and rotate between them in case of consistent data connectivity issues. For 2 profiles a simple “fallback APN” logic could be:
Use Default APN 1 for profile 1 - data fails
Use Fallback APN 2 for profile 1 - works. Mark this APN as default & APN 1 as fallback.
Use Default APN 2 for profile 2 - data fails
Use Fallback APN 1 for profile 2 - works. Mark this APN as default & APN 2 as fallback.
Write or paste your HTML code here